rear garnish
4 posts
rear garnish |
|
|
by mrgnluke on 24-02-09 03:58 PM hey im wanting to remove the rear garnish of my gen2 sedan. |
|
Re: rear garnish |
|
|
by got Nang? on 24-02-09 04:24 PM im pretty sure theres a few you will need a deep socket for 10mm maybe. from what i can remember there recessed into the bootlid. look in all the little holes. i think theres also some sikaflex holding it on so be careful removing it. |
|
|
|
Re: rear garnish |
|
|
by caped crusader on 24-02-09 05:03 PM In addition to the two screws at either end, there are five across the centre of the garnish accessed via the back of the boot lid. There are also three electrical connections, the plugs to the brake/blinkers, one on either side, and the number plate light in the centre. |
|
|
|
Re: rear garnish |
|
|
by walts on 24-02-09 05:25 PM all of the hard to reach ones are 8mm but you need a really long socket (which cost me about 2 bucks from bunnings) |
|
- Index
- » Liberty Specific Topics
- » Exterior
- » rear garnish
