Is that your legacy? Looks sweet! Not sure about finding an OBD2 scanner though? Does the place you service your car have one?

Not sure about affordable, but I believe Tractrix cables are quite good: http://www.tactrix.com/

I have this but it cannot connect to the Subaru system:

http://www.toolprofessional.net/Equus-3 … ce=froogle

Thanks for the input guys!!

LHD conversion? That sounds like a lot of work and potentially could be responsible for the error codes. What country are you from?

Im in region NSW mate, and also have a Legacy!

I might be wrong but can you pull the codes manually? Isnt there a way to count the flashes or something? You can also try the nz forums, lots more Legacys on there. clubsub.org.nz

Can't you connect the diagnostic cables together like on the Gen 2 (BG5)? There should be two green and two black cables that plug in together (above the pedals, you'll need to remove the plastic cover to get to them) switch on the ignition but don't start the car - the engine light will flash to display any stored codes. The long flash = 10 and the short flash = 1 so 2 x long flash and 3 x short flash = code 23 for example.

Although yours has been converted to LHD so I guess the wires might be hard to find if they didn't move them over...