Install Chirps on existing remote lock Liberty 2011
5 posts
Install Chirps on existing remote lock Liberty 2011 |
|
|
by Rodney on 17-08-11 03:39 PM Hi can any one help, I would like to install chirps/beeps on my factory central locking,only the lights flash at present |
|
|
|
Re: Install Chirps on existing remote lock Liberty 2011 |
|
|
by B4Cruiser on 17-08-11 03:49 PM Haven't used it in ages but from memory, i think you press your 'lock' 3 times consecutively. Others can confirm/correct. |
|
|
MY03 Liberty B4 |
Re: Install Chirps on existing remote lock Liberty 2011 |
|
|
by Gyro Gearloose on 17-08-11 08:00 PM I bought a 12v piezo from Jaycar that I am gonna install, wired with a diode to the flasher output on the central locking controller so that I get one "beep" on lock, and two "beeps" on unlock |
|
|
If you knew, you'd be in a Subaru too. |
Re: Install Chirps on existing remote lock Liberty 2011 |
|
|
by r3flex on 10-10-11 03:59 PM my lights don't even flash on my gen3, I never knew they were suppose to hmm wonder what the problem is |
|
|
|
Re: Install Chirps on existing remote lock Liberty 2011 |
|
|
by milo101 on 11-10-11 07:34 AM Press and lock your door 5 times with the remote and it'll turn on, unlock 5 times in a row to turn off. I'm not sure if you need the factory alarm to enable churps...
|
|
|
|
- Index
- » Liberty Specific Topics
- » DIY Section
- » Install Chirps on existing remote...
Board Info
- Board Stats: Total Users: 12431 Total Topics: 19479 Total Polls: 12 Total Posts: 151087915 Total Posts Today: 6
- User Info: Newest User : Beans GT Members Online: 1 Guests Online: 107
- Online
- Renmazuo27,
