fitting 03 bonnet onto a 99RX
12 posts
fitting 03 bonnet onto a 99RX |
|
|
by rsk on 14-05-10 01:00 AM Would a 03 bonnet fit onto a 99 Rx? what else do I need to replace? guards, headlights and bumper? or just headlights and bumper.
|
|
|
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by bravo_007 on 14-05-10 09:32 AM Technically the whole front cut as every part is dependant on the other... For example, if you change the bonnet, you have to change the headlights, if you do that then you have to change the guards and bumper or non of them will sit properly. Different dimensions!!! |
|
|
White MY02 Liberty B4 - Dyno Tuned @ HP-F - APEXi CAI - STi Front Lip - 6000k Xenons - Full 2.5" turbo back exhaust system - 18" GMAX in black. |
Re: fitting 03 bonnet onto a 99RX |
|
|
by mrgnluke on 14-05-10 01:23 PM 99 is the Rev A-C Gen3 and the 03 is one of the last Gen3s made. The whole front end is different |
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by rsk on 14-05-10 09:33 PM Thanks,It might be easier to stick to the 99-00 model B4 bonnet. |
|
|
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by s401 on 19-07-10 07:36 PM is this to cool your throttle body? |
|
|
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by mrgnluke on 19-07-10 09:13 PM
That is your only option if you want a scoop. Unless you buy an aftermarket one, cut a hole in your bonnet and stickytape it on Early B4s were never made in Aus so it will be harder to find one FYI |
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by aekOne on 19-07-10 10:33 PM
It'll look like my Rav 4 with a rex scoop 
|
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by XoN on 20-07-10 08:04 AM Hot Aek. I'm flashing back to a white gen2 with a similar scoop... |
|
|
V7 STi EJ207 powered 1998 Liberty RX Bilstein Edition |
Re: fitting 03 bonnet onto a 99RX |
|
|
by aekOne on 20-07-10 08:47 AM haha you know i spent half an hour looking for pics of that last night but could find one anywhere. dylan has done well to remove any records of that from the interwebz |
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by XoN on 20-07-10 09:01 AM |
|
|
V7 STi EJ207 powered 1998 Liberty RX Bilstein Edition |
Re: fitting 03 bonnet onto a 99RX |
|
|
by aekOne on 20-07-10 10:53 AM hahaha i love you luke. that photo really doesn't do it justice though. The best pic is of it all dented and sitting in the skip bin out the front of A&J |
|
Re: fitting 03 bonnet onto a 99RX |
|
|
by XoN on 20-07-10 11:03 AM Nah I know |
|
|
V7 STi EJ207 powered 1998 Liberty RX Bilstein Edition |
I have some more sitting on a CD somewhere from when we did the conversion. I think it was red or black or something then too, I'll have to dig them out!- Index
- » Off Topic
- » General Discussions
- » fitting 03 bonnet onto a 99RX
Board Info
- Board Stats: Total Users: 12431 Total Topics: 19476 Total Polls: 12 Total Posts: 151087914 Total Posts Today: 2
- User Info: Newest User : Beans GT Members Online: 0 Guests Online: 119
- Online There are no members online
