umm sorry I forgot to put that, I'm not sure but I have a GEN3 Outback so Libertys/Outbacks and foresters etc around this year model (ie. late 98 - 03)
The site I actually found the info on was for a forester but I just tried it and it worked, I wasn't going to pay Subaru dealership to do something that took me 5 mins!

Cheers, Nic

these are gen 3's libs/outbacks only

dont know about any later models but doesnt work on gen 1 and 2

tabone

The bottom of which door? Are you talking about the door skin or the door sill plate?

Wish you can program the central locking so with one press it only unlocks the drivers side door and with two it opens all 4.

youngy69;176744 wrote:

Unfortunately you will have to upgrade to a GENIV for that feature!!!

Question. Can a new key be programmed if you dont have an original key? As I have the remote control unit from the halfcut but not a key

sorry I meant that I have the control unit not the transmiter. My car doesnt have factory keyless but when I switched looms for my conversion the new loom had the remote unit. So what i was meaning is if I was to get a new transmiter or find a 2nd hand one can it be programmed in a similar way to work with this control unit?

can i get a definite answer. Would my RX come with central locking?? cause if so i dont have the transmitter. So is it possible if i get one of the transmitters if i do this will it work?? As by the explanation from the OP it seems as though you need an original transmitter.

Cheers

Hey cm27456,If you have a RX it will have central lock as standard.You can verify this by moving your inner door lock and see if the others work.If it works you will need to get a factory FOB and code it as per the instructions.They are not cheap though.PM your vin and i will see what i can do.

Cheers Eddie

hey guys. just got a gen3, 99 RX and wen locking and unlocking the blinkers dont flash (i am assuming this is the way its meant to be. correct?).
But its really annoying, means i cant be far away from the car and press lock and know it DID lock cos u need to hear the sound..

so what i want to know, is if the blinkers can be made/programmed to flash??

thanks anyone. in particular, eddie. u seem to know your stuff aye
dan.