conversion guys your time to shine...

7 posts
Page:   1 

conversion guys your time to shine...

 		  Top of Page

by Libwagz on 25-04-07 05:04 PM

Ok so this kind of goes out to all the boys that have done conversions, im just wondering as my car has airbags and say the front cut i get doesn't will this affect it in any way???? i understand how the airbags work with the sensors and the box behind the dash but..... is it something more with the ecu??? and with the cluster there is an airbag light on there im wondering if it's all going to effect it???? help please
Josh
Libwagz
useravatar

Posts:  568

Status:  Offline

"It's my d!ck in a box" :rap:
Past: 1994 GEN 2 GX Wagon
Present: 1993 RS Liberty turbo Wagon
----------------------------------------------------------------------------
[color="Red"]The Wagon Syndicate Member #6[/color]
[color="DarkOrange"][COLOR="Black"]www.[/color]OZ[color="Black"]MODERATOR.com[/color][/COLOR]

Re: conversion guys your time to shine...

 		  Top of Page

by rxliberty2000 on 25-04-07 05:50 PM

I take it you are not using a legacy cut then.

You should just leave all your airbag stuff in there, and keep your dash.
And then the airbags should work just fine.

From memory the air bags don't connect to the ecu, they are a seperate loom.
rxliberty2000
State Rep
useravatar

Posts:  3857

Status:  Offline

2000 Liberty GT-B

Re: conversion guys your time to shine...

 		  Top of Page

by AWD_1993 on 25-04-07 05:53 PM

As Mickey said... the airbag loom is totallly seperate from the normal loom and is surrounded by yellow tape (to differentiate it).

It is unlikely your dashboard will have an airbag light...
AWD_1993
useravatar

Posts:  445

Status:  Offline

Re: conversion guys your time to shine...

 		  Top of Page

by Libwagz on 25-04-07 06:00 PM

AWD_1993 wrote:

As Mickey said... the airbag loom is totallly seperate from the normal loom and is surrounded by yellow tape (to differentiate it).
It is unlikely your dashboard will have an airbag light...
It does within the instrutment cluster it comes on for about 5-10sec's when i start the car, it's just there if something goes wrong it can allert you by staying on or something...
thanks for the replys guys should be good to go then...
Libwagz
useravatar

Posts:  568

Status:  Offline

"It's my d!ck in a box" :rap:
Past: 1994 GEN 2 GX Wagon
Present: 1993 RS Liberty turbo Wagon
----------------------------------------------------------------------------
[color="Red"]The Wagon Syndicate Member #6[/color]
[color="DarkOrange"][COLOR="Black"]www.[/color]OZ[color="Black"]MODERATOR.com[/color][/COLOR]

Re: conversion guys your time to shine...

 		  Top of Page

by rxliberty2000 on 25-04-07 06:06 PM

It will stay on if you have an issue with your ABS computer, you can check codes on the ABS computer also.

I would recommend leaving your dash to keep that.
rxliberty2000
State Rep
useravatar

Posts:  3857

Status:  Offline

2000 Liberty GT-B

Re: conversion guys your time to shine...

 		  Top of Page

by tHe gUt on 25-04-07 06:07 PM

i recommend hurrying the fcuk up with the conversion wink
tHe gUt
useravatar

Posts:  1318

Status:  Offline

   

[INDENT][INDENT][INDENT][INDENT]Go SUSU.... :neo: can i get an aaamen?:bb2:

[/INDENT][/INDENT][/INDENT][/INDENT]
   

[INDENT][INDENT][INDENT][INDENT][ http://s97.photobucket.com/albums/l237/ … I_0844.flv ]

[/INDENT][/INDENT][/INDENT][/INDENT]

dylanf wrote:

LMAO I have man when you ran that 200 hahahaha BRRRRRRRRRR .... PSSSSSSSSSSSS *SQUAT* BRRRRRRRRRRRRRRRRRR PSSSSSSSSSSSSSSSSSST *SQUAT* then I see your goofy head hanging out the window ROFL

Re: conversion guys your time to shine...

 		  Top of Page

by rxliberty2000 on 25-04-07 06:10 PM

tHe gUt wrote:

i recommend hurrying the fcuk up with the conversion wink
I'll second that!
rxliberty2000
State Rep
useravatar

Posts:  3857

Status:  Offline

2000 Liberty GT-B
Page:   1 

Board Info

Board Stats:   Total Users: 12431  Total Topics: 19476  Total Polls: 12  Total Posts: 151087914  Total Posts Today: 2
User Info:   Newest User :  Beans GT   Members Online: 0   Guests Online: 99
Online  There are no members online
Generated in 0.468 sec. Queries: 81
RSS - Subscribe to ozLiberty feeds Twitter - follow our tweets MySpace - Join our groupFacebook - Join our group