just cable tie them on...

you just place the over the old ones and use the brackets that u got with the momo's and use the screws and screw them to the pedal via those brackets ...

Thanks guys..

Sounds simple enough. & now for the gear knob.. is there any practical way to get the knob off? There arent any allan key holes or anything so im once again a little perplexed as to how i should remove it.

Any help would much appreciated..

Thanks Again,

Lukee

Really?

it feels pretty stiff.. ill just try harder.. Do you reckon ill have to shorten the stick after i put the MOMO knob on?

stock pedals off late model wrx's fit straight on.
you know those chrome ones with the black dots on them.
wicked upgrade but still with a stock look
and you can pick them up at wreckers much cheaper than momo ones..

I saw a 08 STi with the same pedals so I'm pretty sure they're generally all the same. I bought mine secondhand from eBay. I would imagine should fit just fine. However, I haven't seen an auto set before...

I recently added some STi pedals to my ride with the foot rest and looks shmick... big thanks to da man GEN3MY00

for gen 3 you remove the pad on the brake and cluth but the sti pedals more is like a generic bolt on pad with a lip under the bottom and a bracket on the top which you use to secure it. The sti accelerator pedal goes over the top of the oem pedal and is screwed in place through the hinge on the accelerator pedal assembly. Both types are easy to put on

i've got a gc8 my99 pedal box in my legacy with STI pedals which uses the same mounting type as the gen 3. One actually came off when i was at Wakefield a few months ago. It never happened before and hasn't since but i guess it is a bit of a concern. Make sure you use some lock tight on the hardware when you put them on!

never had any issue in the liberty as it had the bolt in type for auto. when i did the manual conversion i got the pedal box from an my02 sti which came with the newer silver and black pads

Legacy:





Liberty: