i have the wiring diags , personally , id rather listen to the whine of my turbo

Fritter wrote:

The whine of the 'Mrs' is louder so I need something to drain that out .......
Mate if you could send me a copy I'd appreciate that!!

Its pretty easy to hook it up when you have the wiring diagram. Cause all you need to really do is connect power/ground/acc to the new unit, and then cut the speaker wires and solder to some RCA cables (which works perfectly fyi) and then plug those into the new stereo.

Mine is a bit more complicated cause i made a carputer for her But as above, its not to much of a hassle.

While doing it if you want a little more bass from the sub and you are handy with a soldering iron, you can solder a resistor on the amp which boosts the bass It was better than std  but still not enough for me. Ill be finishing the install later this year.
http://nzlamb.wordpress.com/2010/04/19/ … ofer-hack/

there is also a thread somewhere on nasioc that has lots more wiring info to